|
|
Your type of siding:
|
|
|
|
Cement fiber siding
|
|
|
|
The products that are available to you are:
Click on name or picture for more information or to order
|
|
|
|
The 199 Series Corners are
manufactured with a full wraparound
lower lip requiring no bottom nail.
Manufactured in smooth or wood grain
textured. 0.015 aluminum, the outside is
primed and ready to paint. The inside is
coated with an epoxy backer to prevent
corrosion. Face width per side at the
bottom 1-3/4", tapering to 1-1/4" at the
top.
|
|
|
 |
|
|
|
Siding Corners
(199 Series)
|
|
|
|
|
|
|
|
|
|
|
The 199 Series Corners are
manufactured with a full wraparound
lower lip requiring no bottom nail. The
outside is primed and ready to paint.
The inside is coated with an epoxy
backer to prevent corrosion. Face width
per side at the bottom 1-3/4", tapering to
1-1/4" at the top.
|
|
|
 |
|
|
|
Vertical Grain
Siding Corners
(199VG Series)
|
|
|
|
|
|
|
|
|
|
The Joint Covers protect the butt joint
where two siding planks meet and a 1/4"
expansion joint helps to prevent siding
buckling. A wraparound lower lip hooks
the siding and requires one nail to hold
it in place. These covers are primed on
the outside for easy painting and coated
on the inside with a chromate backer to
inhibit corrosion.
|
|
|
 |
|
|
|
Joint Covers
(140 Series)
|
|
|
|
|
|
|
|
|
|
|
The 1-1/4" overlap of Off Stud Joiners
saves additional installation time and by
not joining directly over the stud you can
eliminate corner breakout. Off Stud
Joiners are manufactured using 24
gauge, G-90 galvanized steel, preprimed
for easy painting. The joiners creates a
solid backing behind the joint producing
a better caulk line and holds the bottom
edge in line to provide a seamless
appearing joint.
|
|
|
 |
|
|
|
Off Stud
Joiners
|
|
|
|
|
|
|
|
|
|
|
Junction Flashing is made of 0.015
primed aluminum with an epoxy backer
to protect from corrosion. Junction
Flashing is manufactured specifically for
Fiber cement siding as a weather
resistant barrier. The ¼” Slip Fit
Positioning Lip insures quick and
accurate placement every time.
|
|
|
 |
|
|
|
Junction
Flashing
|
|
|
|
|
|
|
|
|
|
|
The clips can significantly reduce
installation time, and effectively reduce
the number of workers required to install
the siding, resulting in overall job cost
savings. Each clip gauges the 1-1/4" set,
while providing a shelf for the next lap to
rest on while nailing. Aligning Clips are
manufactured using G-90 galvanized
steel, prime coated for easy painting.
Once installed and painted, the small
portion of the clip that is left exposed is
virtually invisible. No part of the clip
covers the exposed face of the siding.
|
|
|
 |
|
|
|
S/A Clips
|
|
|
|
|
|
|
|
|
|
